Products
  Acrylic Resins
  Speciality / Modified Alkyd Resins
  Butylated MF Resin
  Alkyd Resins
  Butylated UF Resin
  Maleic Modified Rosin Ester
  Epoxy Resin
  Epoxy Hardner
(Polyamide Resin)
  Ketone Resin
  Phenolic Resin
  Polyester Resin
  Water Thinneble Resin
 
Products
  PU Automotive Paint and Automotive Refinishing Paint
  Paint for specific use
  Wood coating
  Amino-alkyd baking coating, alkyd air drying paint
  Alkyd air drying paint
  Nitrocellulose lacquer, polyurethane paint
  Alkyd for polyurethane paint
   
More...    
 
PRODUCTS
Speciality Alkyd Resins    
Sr no Product Code Oil Type & Length % Solid
(±2)
Solvent Acid Value KOH/gm max. Viscosity 30*C in FC4 in 50% O-Xylene in Seconds Colour on Gardner scale 50% solution of resin (max.)
1 Acry-25 Soya Fatty Acid oxidising short oil modified with Acrylic Monomer 50 Xylene /Toluene 10 10-12 poise in BF RVT/S-3, RPM-20 at 25'C 4
Notes : Very fast drying resins. Excellent outdoor durability. Touch dry within seconds and hard dry in just 2 hours. No or very little dryer is required.
2 Acry-35 NC Replace non-oxidising short oil modified with Acrylic Monomer 60 Xylene / Tolune 10 6-9 of 50% in MX in BF RVT/S-3, RPM-20 at 25'C 5
Notes : Very fast drying resins. Excellent outdoor durability. Used in NC(Nitro Cellulose) replacement for wood and colour coating.
3 Acry-300            
Notes :
4 C-1032 (IPA+TMP) Coconut Fatty Acid non-oxidising short oil 70 Xylene /Toluene 15 150-200 2
Notes : Non drying alkyd. Almost water colour clear resin. Very high temperature resistance up to 200*C with out yellowing with MF-268 in stoving system. Based on Iso phthalic acid and Trimethlol propane.
5 Polyol-32 Polyester - polyol for PU system 70 Toluene / Xylene 135-145 Hydroxyl Value 225-300 2
Notes : Very fast in drying. Gives flexible and non yellowing performance with aliphatic isocynates. Very cost effective compared to conventional ether polyols and acrylics.
6 S-5060 (IPA) Soya oil type long oil alkyd 60 MTO / White Spirit 15 100-125 5
Notes : Air drying long oil non yellowing alkyd based on Iso Phthalic. Acid for high temperature resistance and better flexibility.
7 Polyol-280 Polyester - polyol for PU system 70 Toluene 100-125 Hydroxyl Value 125-175 4
Notes : Very fast in drying. Require very less isocynate for curing. Very cost effective compared to conventional polyols ether.
8 Polyester IPA-NPG Polyester - polyol for PU system 70 Toluene 100-125 Hydroxyl Value 125-175 4
Notes : Very good exteriod durability with isocynate when used as polyol. Excellent gloss in PU as well as stoving system. When stove with MF-268 films will withstand up to 225*C without yellowing.
9 MFHF Hammer Tone Finish Medium 70 Xylene 15 90-120 11
Notes : Ready mix medium for Hammer Finish.
10 MFAP Aluminum Paint Medium 50 MTO / White Spirit 5 17-20 10
Notes : Ready medium for Aluminium Paints.
11 TS-8060 Soya Oil semi Oxidising 60 MTO / White Spirit 10 75-95 6
Xylene 50-70
Notes : TDI modified for fast drying Alkyd for single pack wood coating enamels for high gloss and abrasion resistance. Urethane Alkyd, 1K PU
12 ACRY-302 Soya / DCO 60 CIX 10 65-75 in 45% CIX at 30'C 5
Notes : Very high gloss. Excellent built in air drying properties for industrial finishes. Very fast and rapid drying resin ( 60% in C-IX ). Excellent outdoor weather resistance and good water & oil resistance properties. Excellent non-absorbtion in porous surface.
13 ST-30 Soya / DCO 60 Xylene 10 25-35 Poise in BF LVT/S-3, RPM-12 at 25'C 4
Notes : Styrenated Alkyd in Xylene formulated to provide very economical industrial coating with a high degree of gloss, hardness, durability, water and oil resistance.
Top
 
iso_logo   165, Maha Gujarat Industrial Estate,
Opp. Nova Petrochem,
Sarkhej - Bavla Road,
Po. : Moraiya
Dist. : Ahmedabad (INDIA)
Home | About Us | Products | Applications | Formulations | Types of Paints | Contact Us
 
Copyright©2006 Macro Polymers Pvt. Ltd.       Design & developed by Isheeka Graphics